20
3.2
Troubleshooting
Box rotator model
Problem
Solution
All models.
The box rotator is not in a horizontal position if
the piston rod of the cylinder is fully retracted.
Loosen the clamping bolts at the ends of
the piston rod and screw/unscrew the
piston into/from the block. Proceed until
the fork carrier (9) is in a horizontal
position with the back plate (1). Tightly
secure the clamping bolts.
K53a/K53c/DKB-25/DKD-35. There is some play in the bearing (sleeve bearing)
on the shaft of the fork positioner.
The bearing is worn-out and must be
replaced by a skilled mechanic.
K53a-z/K53c-z
DKB-25-z/DKD-35.
There is some play in the bearing (tapered roller
bearing) on the shaft of the fork positioner.
Loosen the lock nuts of the socket set
bolts; fasten the socket set bolts by hand
in the locking plate (4) and turn one
quarter back. Proceed with tightening the
lock nuts.
Table 3.2.1-Troubleshooting
Please contact your dealer for any further concerns you may have. He will be pleased to assist.