1. Mounting the Outdoor Radio
There are two parts of the Mounting kit:
¾
Enclosure bracket
－
attached to the back of the outdoor radio.
¾
Pole bracket
－
mounted on the pole or tower with the U-bolts.
Follow the next steps to mount the Outdoor radio on the pole.
i.
Mount the enclosure bracket to the back of the outdoor radio.
ii. Mount the pole bracket to the pole with the U-bolts.
iii. Attach the radio with enclosure bracket to the pole bracket which was mounted on the pole
with the supplied screws and U-bolts.
iv. Tighten the all the screws, U-bolts, washers and nuts with hand tools.
Mounting Explosion Assembly Figure
Only trained and qualified personnel should be allowed to install, replace, or service
this equipment.
PDH / Ethernet Convergent System Quick Installation Guide
