Wifire Remote User Guide
3
For a brief tutorial on using the WiFire Remote, please watch the 'How to Use Your WiFire
Remote' video.
Your WiFire Remote will come complete with the following:
Power Adapter
36", 110 VAC to 5 VDC power supply. If more length is required, a simple household
extension cord may be used.
Room Air Temperature Sensor
Room temperature is reported to the WiFire Remote by the Temperature Sensor. The
WiFire Remote then uses this information to decide when to turn the appliance on and off
in order to maintain the desired temperature of the room. The Sensor should be located
in a spot that reliably indicates the temperature of the room without being influenced or
"tricked" by direct sunlight, by the flames in the fireplace, or by a cold-drafty window.
The WiFire Remote comes with a standard gauge 1 meter sensor lead (3.28'). Longer
sensor leads are also available; a standard gauge, 3 meter long lead (9.84'), and a 10
meter long lead (32.8') that is a much thinner (26 Gauge) 2 conductor lead that is ideal
for tucking into a carpet seam or routing in grout lines during new construction or when
possible.
Wi-Fi Antenna
The external Wi-Fi Antenna ensures optimum communication with your local area
network. It is best located in the front of the fireplace cavity and comes with an adhesive
back if you prefer to affix it to a flat surface.
Dry Contact Lead Wire
Approximately 18" of 2 conductor lead wire will also be supplied with your WiFire
Remote. As described in the instructions, you may choose to disconnect the lead wire
from the existing fireplace control (wall switch, thermostat or remote) and reconnect
such wire to your new control – the WiFire Remote. This lead wire is being supplied in
case you wish to disconnect the existing control from the valve all together and attach
the WiFire Remote to the valve with a fresh connection.