5
| Switch Design
Wieland Electric GmbH | BA001108 (Rev. A) | 01/2017
11
Note!
Make sure the screws dimensions are suitable for
use with the wall mounting plate.
Do not completely tighten the screws into the wall. A
final adjustment may be needed before fully securing
the wall mounting plates on the wall.
11.
Align the wall mounting plate over the screws on
the wall.
12.
Install the wall mounting plate on the screws and
slide it forward to lock in place.
13.
Once the device is installed on the wall, tighten
the screws to secure the device.
5.6
Description of the Front-Panel
On the front panel some LEDs can be found which indicate the power and network status.
LED Definition
LED
Color
Description
P1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
P2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
P-Fail
Red
On
Power input 1 or 2 is in-
active
Off
Power input 1 and 2 are
active or no power input
Loop
Red
On
Loop is detected
Off
No loop detected
NOTE
Wall mount installation
