5 Managing Switch
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
67
5.7.9.8
MST Instance Info
To access this page, click L2 Switching > Spanning Tree > MST Instance Info.
The ensuing table for STP Bridge Status settings are informational only: Bridge Identifier, Designated Root
Bridge, Root Path Cost, Designated Bridge, Root Port and TCNLast Topology Change.
The ensuing table for STP Port Status settings are informational only: Port, Identifier (Priority / Port Id),
Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost, Designated Bridge, Edge Port Conf/Oper,
P2P MAC Conf/Oper, Port Role and Port State.
5.7.9.9
STP Statistics
To access this page, click L2 Switching > Spanning Tree > STP Statistics.
The ensuing table for STP Statistics settings are informational only: Port, Configuration BPDUs Received,
TCN BPDUs Received, Configuration BPDUs Transmitted and TCN BPDUs Transmitted.
5.7.10
X-Ring Elite
The X-Ring Elite function provides an improvement over Spanning Tree and Rapid Spanning Tree and a
rapid auto recovery in the event that the network suffers a corrupt or broken link and prevents network
loops.
5.7.10.1
X-Ring Elite Settings
The X-Ring Elite Settings allows you to enable or disable the state of the X-Ring settings.
To access this page, click L2 Switching > X-Ring Elite > X-Ring Elite Settings.
Figure 5.43 L2 Switching > X-Ring Elite > X-Ring Elite Settings
The following table describes the items in the previous figure.
The ensuing table for Information settings are informational only: X-Ring Elite State.
5.7.10.2
X-Ring Elite Groups
The X-Ring Elite Groups page allows you to select the function and role for each device and the connected
ports.
To access this page, click L2 Switching > X-Ring Elite > X-Ring Elite Groups.
Figure 5.44 L2 Switching > X-Ring Elite > X-Ring Elite Groups
The following table describes the items in the previous figure.
Item
Description
State
Select Enabled or Disabled to setup the X-Ring Elite mode.
Apply
Click Apply to save the values and update the screen.
