Wieland samos PRO, Manual

Page: 85 / 192

EtherNet/IP gateway
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
85
If an error occurs at the terminal input of a specific instance between 401 and 528 and the SP-COP2-
ENI module is in
Run
mode, the value of the instance attribute 4 equals 1. In all other cases, the va-
lue equals 0.
Table 43: Overview of the discrete input point objects (0x08) supported by the SP-COP2-ENI module
Class Instance Attribu-
te
Access Data type Description Data range
8 0 = Class 1 Read UINT Revision of the class 2
8 0 = Class 2 Read UINT Max. instance 584
8 0 = Class 3 Read UINT Number of instances 400 + 128 + 56
Logic + input +
output
8 0 = Class 6 Read UINT Max. class attribute ID 7
8 0 = Class 7 Read UINT Max. instance attribute ID 4
8 1 to 400 and
529 to 584 1 Read USINT Number of attributes 3
8 401 to 528 1 Read USINT Number of attributes 4
8 1 to 528 2 Read USINT[4] List of support attributes {1, 2, 3, 4}
8 529 to 584 2 Read USINT[3] List of support attributes {1, 2, 3}
8 1 to 400 3 Read BOOL The value of the input bit, configured
by the
output data set 1 in samos-
PLAN 6, stands for the data transferred
by the logic of the controller module to
the PLC.
0 = Off,
1 = On
8 1 to 400 4 Read BOOL State of
output data set 1
0 = OK
8 401 to 416 3 Read BOOL
Value of terminals I1 to I16 of the SP-
COP2-ENI module
0, 1
8 401 to 416 4 Read BOOL
State of terminals I1 to I16 of the SP-
COP2-ENI module
0, 1
8 417 to 420 3 Read BOOL Value of terminals IQ1 to IQ4 of the SP-
COP2-ENI module when configured as
an input 0, 1
8 417 to 420 4 Read BOOL State of terminals IQ1 to IQ4 of the SP-
COP2-ENI module when configured as
an input 0, 1
8 421 to 430 3 Read BOOL Reserved 0
8 431 3 Read BOOL Value of B1 Voltage is...
0 = Outside
the tolerance
1 = Within the
tolerance
8 432 3 Read BOOL Value of B2 Voltage is...
0 = Outside
the tolerance
1 = Within the
tolerance
8 421 to 432 4 Read BOOL Reserved 0
8 425 + 8 x n
to
432 + 8 x n 3 Read BOOL Value of terminals I1 to I8 of the SP-
SDI[n] / SP-SDIO[n] module,
with n = 1 to 12 0, 1
8 425 + 8 x n
to 4 Read BOOL State of terminals I1 to I8 of the SP-
SDI[n] / SP-SDIO[n] module, 0, 1