Wieland gesis SPZ, User Manual, Page: 14 / 22

Mounting
Wieland Electric GmbH | BA001298 | 09/2022 (Rev. A) 14
8.3.2 Pluggable connections with ready-made connectors
For technical data and mounting instructions relating to connectors, visit https://eshop.wieland-
electric.com or scan the QR code below. Navigate to the "Technical Data" or "Downloads" area of
your product.
All connectors can be plugged into the distribution box without using tools. Always make sure that
the mechanical coding and color coding are the same, and ensure the correct orientation of the con-
nector.
Disconnecting connectors
Notes on removing the connectors can be found in the respective product catalog or in the assembly
instructions for the connector in question.
Tab. 2: Disconnecting self-assembled connectors
Connector / measures gesis®
CLASSIC
gesis®
MINI
gesis®
MICRO
RST®
CLASSIC
RST®
MINI
RST®
MICRO
gesis®
NV
RJ 45
Create load relief X X X X X X X X
Release interlock X X X X X X X X
It is not necessary to open the distribution box in order to remove the connector.
8.3.3 Connectors with non-pluggable input
Some gesis® SPZ distribution boxes do not have a pluggable input. In this case, a cable screw gland
or a T-head rail can be used as an input. The connections must be wired directly to the installed con-
nection points. Variants with a flat cable adapter are already wired internally and just have to be
connected to the flat cable.
8.3.4 Fitting the flat cable adapter to the flat cable
For more information on installing the gesis® SPZ distribution box with flat cable adapter, please
visit https://eshop.wieland-electric.com/download/92.050.9153.0/IM0176372.PDF or scan the fol-
lowing QR code.
8.3.5 Data line
If your gesis® SPZ distribution box is designed for decentralized data distribution, the distribution
box will feature recesses for keystone elements. The relevant elements must be installed on site in
accordance with the standards, see chapter 13 "Accessories", p. 19.
8.3.6 Connecting the earthing point
In order to ground the gesis® SPZ distribution box, connect the protective conductor connections to
the ground connections on the housing and, if applicable, the cover in accordance with standards.
NOTE