manualshive.com logo in svg

Wiedenmann Terra Rake 170, Translation Of Original Operating Instructions

Share
Download
Wiedenmann Terra Rake 170 Translation Of Original Operating Instructions Download Page 13

All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of 

publication. We reserve the right to make design changes at any time without prior notification

 

13 

2.0. Assembly 

2.1. General Information 

Only attach the machine on 
firm, even ground. 

 

The Terra Rake is secured to 
the pallet by two transport 
feet when delivered. Once 
removed, the transport feet are 
no longer required and can be 
disposed of. 

 

For this work, please use your 
personal protective equipment 
(PSA) such as: gloves, goggles, 
ear protectors.

 

 

2.2. Fitting the three-point frame 

 

Securely bolt the three-point 
frame (A) onto the appropriate 
hole pattern using five hexagon 
bolts (B). 

 

 

 

 

 

2.3. Electric connection to battery 

 

Only appropriately qualified 
professionals may carry out the 
connection work. 

Electrical connection is 
necessary for supplying the 
electrospindle with electric 
power. 

See the accompanying 
instructions for the 
installation description. 

 

 

 

 

Summary of Contents for Terra Rake 170






































Reviews:

No comments

Brands by name

Popular brands

Load more brands