Terra Clean 100
8 Before initial operation
10 | 2020
239 99 01
–
003
35
8.2.2
Setting the adjustment plate in the container
In order to change the material flow and therefore dirt separation,
the adjustment plate (
A
) can be set variably. To do this:
➢
Undo the wing nuts (
B
).
➢
Set the adjustment plate (
A
).
➢
Retighten the wing nuts (
B
).
INFO!
➢
On newly prepared grounds, a
considerable amount of loose fibre must be
expected.
Agitator unit tilt
angle
Description
Adjustment plate setting
+
•
for dry conditions
•
new or highly filled grounds with low dirt proportion
•
on regularly maintained grounds with low proportion
of coarse dirt
•
for deep surface cleaning
➢
Position in the upper slot
•
on regularly maintained grounds with low proportion
of coarse dirt
➢
Middle slot
Neutral
0
•
on regularly maintained grounds with coarse dirt
•
for dry conditions with fibre content
➢
Middle slot
-
•
grounds which are not regularly maintained with
broken fibre content
•
for dry conditions and flat surface cleaning
•
for flat processing with low leaf coverage
➢
Central or top position in the slotted
hole, depending on the type and
size of the grass
