Wiedenmann Flex Cut RMR 230 H Translation Of Original Operating Instructions Download Page 14 | Manualshive

Page: 14 / 55

background image

Flex Cut RMR 230 H

3 Safety notes

14

846 99 01 - 003

05 | 2021

3.6.4

Coupling up the machine

Failure to couple the tractor and machine correctly leads to hazards that can cause serious accidents.

➢

Observe all relevant information in the various operating instructions when coupling the machine. These include:

•

The tractor operating instructions

•

The machine operating instructions, see Section 6

Attaching to a tractor

.

•

The cardan shaft operating instructions

➢

Be aware of the altered driving characteristics of the combined unit.

3.6.5

Structural changes to the machine

Unauthorised structural changes and extensions can impair the functionality and operational reliability of the machine. This
leads to an increased risk of injury.

Structural changes and extensions are not permitted!

3.6.6

Additional equipment and spare parts

Additional equipment and spare parts that do not meet the requirements of the manufacturer can impair the operational
reliability of the machine and cause accidents.

➢

To ensure operational reliability, always use original or standard parts that meet the requirements of the
manufacturer.

3.6.7

Workstations at the machine

Anyone "riding along" on the machine can suffer severe injuries or fall off and be run over. Objects flying out of the machine
can hit and potentially injure any persons riding along on the machine.

➢

Never allow anyone to ride along on the machine.

3.6.8

Operational reliability, perfect technical condition

Operation only after proper commissioning

Without proper commissioning in line with these operating instructions, the operational reliability of the machine is not
guaranteed. This can then lead to a risk of serious or even fatal injuries.

➢

Do not use the machine until it has been properly commissioned.
See Section 7

Before initial operation

.

Technically perfect condition of the machine

Improper maintenance and settings can influence the operational reliability of the machine and cause accidents. This can
then lead to a risk of serious or even fatal injuries.

➢

Perform all maintenance and setting/adjustment work in line with the "Maintenance" and "Settings" sections.

➢

Prior to performing any maintenance or setting/adjustment work, shut down and secure the machine,
see Section 3.7.1

Shutting down and securing the machine".

«
...
12
13
14
15
16
...
»

Summary of Contents for Flex Cut RMR 230 H
























































Reviews:

No comments

Related manuals for Flex Cut RMR 230 H

Brand: Daewoo Pages: 37

Rotary Cutters RCR1860

Brand: Land Pride Pages: 34

Brand: Flymo Pages: 10

Brand: Jacobsen Pages: 98

Brand: Ransomes Pages: 116

Brand: Yard-Man Pages: 20

Brand: Tanaka Pages: 57

eclipse 2 InCommand

Brand: Jacobsen Pages: 86

Brand: Easymate Pages: 14

Brand: Toro Pages: 2

Brand: McCulloch Pages: 28

A12612A Stockman PRO

Brand: COX Pages: 48

Brand: Eliet Pages: 106

Brand: Land Pride Pages: 2

Brand: Craftsman Pages: 68

Brand: Craftsman Pages: 76

28813 - 46 in. Lawn Tractor

Brand: Craftsman Pages: 68

Brand: Craftsman Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands