All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
19
4.0. Connecting to the Tractor
4.3. Mounting with cat.0
Mount the lower guide bolt on
the inside in the lowest
possible location bore.
You thus achieve a maximum lift
travel.
1.
Mount lower guide to
bolt (A) and secure with
linch pin.
2.
In the case of rear
hydraulics of tractors with
float position:
insert
upper guide with bolt (B)
into bore hole (C) on
three-point frame and
secure with linch pin.
In the case of rear
hydraulics of tractors
without float position:
insert upper guide with
bolt (B) into slotted hole
(D) on three-point frame
and secure with linch pin.
Adjust the upper guide so
that the bolt is located in
the middle of the slotted
hole in the working
position.
3.
Tighten turnbuckles of the
stabilisation chain.
