All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
30
6.0. Maintenance
6.3. Faults and their elimination
Description Cause
Remedy
Drive switched off.
Switch on drive,
(see description in
chapter 5.4.).
V-belt tension too
low.
Retension V-belt
(see Chapter 6.4.).
Incorrect setting of
the opening slide
Check settings and
adjust, if necessary
Some of the wheels
do not touch the
ground
Check attachment
settings
(see Chapter 2.0.).
Remove any seed that is
caught.
Slider cannot be
opened.
Remove, clean and
assemble the tension
springs of the seed
bar.
Dirt in the grooves
of the V-belt
pulleys
Clean the groove of the
V-belt pulleys,
No or insufficient
sowing of seed
V-belt has jumped
the groove
Apply V-belt and
tension V-belt
(see chapter 6.4.).
Move lever into "O"
position
or lift device
Remove any seed that is
caught.
Slider is not closed
Check the tension of
the tension springs
(see chapter 6.6.).
Align the tension
springs
Seed is leaking
from the
container.
Slider does not
close automatically. Clamp the fastening
connections (bearings)
of the brush.
Streaking on the
lawn
Rough brush set too
deep
Check the settings and
readjust them, if
necessary
(see Chapter 4.2.).
