All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
17
2.0. Assembly
2.4. Installing the support wheels
2.4.1. for the models 3353 and 3354
Unhinge the hydraulic cylinder
at the share plate to insert
the top screw.
Screw on support wheels (A) in
the available hole pattern on
both sides.
The support wheel bracket must
be angled inwards as shown in
figure 3350.09.
The figure shows the support
wheel on the right-hand side.
2.4.2. for model 3355
Unhinge the hydraulic cylinder
at the share plate to insert
the top screw.
Screw on support wheels (A) in
the available hole pattern on
both sides.
The wheel bracket is angled
outwards, a larger clearance
for the 3-point installation is
thus achieved.
The figure shows the support
wheel on the right-hand side.
2.4.3. for model 3359
Unhinge the hydraulic cylinder
at the share plate to insert
the top screw.
Screw on support wheels (A) in
the available hole pattern on
both sides.
The support wheel bracket must
be angled inwards as shown in
figure 3350.60.
The figure shows the support
wheel on the right-hand side.
