Packing List
●
IRDE-14001B4-00D-13 Four-Eye LED laser strobe effect light
1pc
●
USER MANUAL 1copy
●
POWER CABLE 1pc
Specifications
1
、
Voltage
：
AC220-240V
2
、
Power
：
30W
3
、
Light Source
：Ф
5 LED(R64
，
G64
，
B64
，
W64),
Ф
10 LED(R48
，
G48
，
B48)
4
、
Control Mode
：
DMX, Auto, Sound, Master Slave and Memory
5
、
DMX Channels
：
6
6
、
Size
：
L930xW175xH203mm
7
、
Net Weight
：
5.5 KG
Operation Instruction
一、
Panel Instruction:
1
、
MENU 2
、
UP 3
、
DOWN 4
、
Enter 5
、
Power input / FUSE 6
、
DMX Intput 7
、
DMX Output 8
、
Sensitivity 9
、
MIC
二、
Power-on Reset
When turn on the power, the display interface will shown data as below. The shown data will last 2 seconds
before enter the pre-shutdown mode. For example, the working mode before the last shutdown is DMX mode, the
address is set 1, then when power is on, the display interface will show the pre-shutdown mode A001 as below.
A001
The display interface will go back to main menu if no button is keyed within 10 seconds .20 seconds with no
buttons, the screen will turn off.
三、
Slave Mode
：
1
、
setting DMX mode and DMX address
：
Press the MENU continuously
，
the working mode will change automatically. When the working mode turns to
DMX mode, release the MENU, and enter DMX. Then press UP or DOWN to revise DMX address, and press
ENTER to confirm. Users can speed or slow the DMX function by pressing the UP or DOWN continuously. The
setting range is from 001 to 512.
2
、
The definition of DMX connector
：
Pin1 = Gnd Pin2 = Dmx- Pin3 = Dmx+
3
、
DMX Slave Mode
：
4
、
DMX Function Table
：
Page 2 of 6
