5
LED will display the current DMX address code of the fixture. At this time, presses Menu to
choose the function you want to set up. Press and hold Up or Down to fast scrolling within
the menu options. When an option is flashing the LED display, press Enter to confirm and
Menu to exit.
LED Operation Menu:
After initialization, the unit is ready for setting and working. Please see the following table for
setting information.
Display
Function
ADDR
DMX Address
（
0-512
）
SLND
NAST
Master
SLAL
Slave
SHND
SOND
Sound control
COLO
COLO
Color choose 1-7
AUTO
Auto operation
FADE
Running Speed (SP1-SP8)
NANU
Red (0-255)
Green (0-255)
Blue
（
0-255
）
CHND
3CH/6CH
FHRS
Operating Hours
For Battery Function and Charge
The unit has the function of battery powered. The button for battery and charge is set on the
rear panel. It is showed as the following picture, and the function is described as below.
6
(1) Alpha-numeric display (2) Touch switches
(3) Microphone (4) DMX-In socket
(5) DMX-Out socket (6) Power switch
(7) Battery switch (8) GND
(9) Power socket and fuse holder (10) Fixation screw
(11) Mounting bracket
There are two buttons on the rear panel of the lighting. One is for power, and the other is
for battery.
●
When use the fixture with DMX, not battery, please switch the button for power to “on”,
and switch the button for battery to “bat off”.
●
When use the fixture with battery instead of DMX, please switch the button for power to
“off”, and also switch the button for battery to “bat on”.
●
When charge the light, please switch the button for battery to “charge”. At the same
time, if the switch for power is “on”, the light will be at work during the process of charge,
but will consume some power from the charge; if the switch for power is “off”, the light
will be blackout and not be at work.
Tip for the battery and charge:
●
The battery can last for 6 hours when all LEDs on after full charge , and can last for
more than 10 hours on auto running mode.
●
It is suggested to charge the battery for at least 8 hours, which will extend the life span
of the battery.
●
At the bottom of the fixture, there is a little hole which is the indicating light for the
charge. When charge the light, the indicating light will be in red, and when charged full,
it will be in green.
