AR2.d CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
MASTER DIM
2
0~255
RED
3
0~255
GREEN
4
0~255
BLUE
5
0~255
White
6
0~255
Amber
7
0~255
Purple (UV)
8
0~255
Speed of dimming
AR2.S CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
MASTER DIM
2
0~255
RED
3
0~255
GREEN
4
0~255
BLUE
5
0~255
White
6
0~255
Amber
7
0~255
Purple (UV)
8
0~255
Speed of Strobe
HSV CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
H hue(0~100%)
2
0~255
S saturation (0~100%)
3
0~255
V brightness(0~100%)
4
0~255
Speed of dimming
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending
on the installation spot and usage have to be adhered to by a skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
CAUTION
: Disconnect from mains before starting maintenance operation!
Cleaning and Using Frequency of Product
Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light clean.
Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use the high
quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or chemical solvent. The
inner part of the light should be cleaned by vacuum cleaner at least once a year.
When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced, find out
the faulty and restart the light. But please note the repair must be handled by professional.
