
4. MENU STRUCTURE
• View Drive Info
• Drive Temp: Displays the temperature of the attached drive in °C.
• Capacity (MB): The capacity of the attached drive, measured in megabytes.
• Manufacturer: The manufacturer of the attached drive.
• Model number: The model number of the attached drive.
• Serial number: The serial number of the attached drive.
• Firmware rev: The firmware revision of the attached drive.
• HPA size (MB): Displays the size of the host protected area, if any, on the attached drive. Measured in
megabytes.
• DCO size (MB): Displays the size of the device configuration overlay, if any, on the attached drive.
Measured in megabytes.
• AMA size (MB): Displays the size of the accessible max address configuration, if any, on the attached
drive. Measured in megabytes.
• Disk health: The S. M. A. R. T. status of the attached drive.
• Start/Stops: How many times the attached drive has spun up and spun down.
• Power cycles: How many power on/off cycles the attached drive has undergone.
• Bad sectors: The number of bad sectors reported by the attached drive.
• ATA/ACS Ver: Displays the ATA-ACS command set version used by the attached drive to communi-
cate with the host. Includes an option to view a table.
• View Dock Info
• Product Name: Displays the product's name
• Unique ID#: Displays the product's unique ID number
• Firmware Ver.#: Displays the product's current firmware version
• Mode: Displays whether the Forensic ComboDock is running in Write-Blocked mode or Read-Write
mode.
• Set DCO/HPA/AMA
• Supported in R/W Mode Only: Appears when the Forensic ComboDock is in Write-Blocked mode. The
other two sub-menu options are disabled.
• Set DCO size: Allows you to create a new DCO. If a hidden area if any kind already exists, the Forensic
ComboDock will ask if you would like to remove it instead.
The Forensic ComboDock will indicate that this process will end any data transfer. Press Enter to
continue. Press Up or Down to set a new size for the DCO, and then Enter. Press Enter again to
Forensic ComboDock FCDv6 User Manual
11