Starting
and
operating
Chapter 5
08.05.2019
Working Instructions WIDOS SPA 600
Page 31 of 42
Select the dimension of the external pipe by pressing buttons <+>, <
> and
<Enter>,
next step by pressing button <Enter>.
Display:
2. line:
angle temp
0.00° 214°C
Setting the angle (appears only if angles can be
welded with the machine).
Enter the angle by pressing buttons <+>, <
> and <Enter>,
the heating element temperature is prescribed by DVS (not changeable).
Display:
2. line:
name of project
WIDOS.............
Enter the project name by pressing buttons <+> and <
>,
confirm by pressing button <Enter>.
Display:
2. line:
number of joint
0000
Enter the joint number by pressing buttons <+> and <
>, (during the welding
process, the joint numbers are counted automatically starting from the entered
number).
Confirm by pressing button <Enter>.
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Basic menu
5.8.
SD card and drive
The SPA 600 can be equipped optionally with a drive for a SD card.
The apparatus then stores the welding data in the internal memory as well as on the SD card if a card
is in the drive.
On a card with 64 MB memory capacity, the welding data of about 32000 weldings can have place.
The SD card must be formatted with „FAT16“ before usage.
Insert the card with the arrow to the top and in direction of the arrow (socket side) carefully and
with a low pressure into the reading unit.
The card can be read out with a WICON program (optional).
The card may not be bent, opened, overheated and become wet!
Please only use SD cards purchased from WIDOS. We will not be liable for any cards
from other manufactures!
