- 8 -
The light of ADD WATER
is on
There is no water or
water is not enough
Press the “STOP” button, fill with
water, and
press the “START” button
again to restart.
Indicator light on the
display is not on
1.Control panel wire
line is loosen
2.Control panel is
broken
Call for service
The water is flowing,ice
is
made,however
no
release of ice
Temperature sensors
are connected by
mitake
Call for service
Everything is correct but
no ice is made.
1.Refrigerant leaks
2.Cooling system
blocked
call for service
WARNING
If the power cord is damaged; it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid a hazard.
Fill with potable water only.
It is normal for the compressor and condenser surface to reach temperatures between 70°C and
90°C during operation and surrounding areas may be very hot.
Due to fast freezing, ice
cubes may appear “Cloudy”. This is air trapped in the water and will
not affect quality or taste of ice.
This appliance can be used by children aged from 8years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision
Do not immerse in water
R-134a is a fluorinated greenhouse gas covered by the Kyoto Protocol,its global warming
potential is 1300.Please keep the unit well.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal,recycle it responsibly to promote the
sustainable reuse of material resources.
