![Widex UNIQUE Series User Instructions Download Page 71](http://html1.mh-extra.com/html/widex/unique-series/unique-series_user-instructions_979158071.webp)
For programming, these requirements include a BER (Bit Error
Rate) better than 10-3, at a bitrate of 212 kbits/s, a semi-duplex
transmission with a required acknowledge, a transmission latency
in each direction (2x) and a receive-to-transmit mode (RX to TX)
time. The data are saved in the hearing aid even when transmis-
sion is interrupted.
During daily use, the requirements on audio streaming between
hearing aids include a BER better than 10-3. The communication is
simplex with a bitrate of 212 kbits/s. The additional audio decod-
ing in this mode results in a longer latency which is less than 10
ms. For remote control commands the QoS requirements include
a BER better than 10-2. The lower BER requirement results from
redundant transmissions. Each key press results in transmissions
of 7 data packages of which only one is needed for a successful
communication.
71
Summary of Contents for UNIQUE Series
