8
9
Drying Kit Instructions:
Use overnight to remove moisture from your hearing aid.
Behind-the-Ear Instruments:
Disconnect the earmould from the hearing aid.
1.
Open battery drawer and remove battery.
2.
With the battery drawer open, place hearing aid and
3.
earmould into the container with the Hearing Aid Saver pod.
Close the lid tightly and wait overnight for best results.
4.
In-the-Ear Instruments:
Open battery drawer and remove battery.
1.
With the battery drawer open, place hearing aid into
2.
the container with the Hearing Aid Saver pod.
Close the lid tightly and wait overnight for best results.
3.
IMPORTANT:
The Hearing Aid Saver uses silica gel to absorb moisture.
Periodically you must reactivate this material. The desiccant
beads are orange when dry and turn green as they absorb
moisture. When all the desiccant beads are green, it is time
to reactivate.
Warning: Do not put the pod or its contents in
your mouth. Keep out of reach of children
.
Reactivating the Hearing Aid Saver Pod in a Microwave Oven:
Remove pod from container. Place pod screen-side up
1.
in microwave and heat for 30 seconds on high.
Fig. 4.
Listening Set with the clear tube
connected. Make sure that the filter
is located at the end of the tube
furthest away from the Listening Set.
Fig. 5.
If necessary, cut the filter off the clear tube as shown.