WWW.WIDDDERTOOLS.COM
®
3
(203) 777-5395
OPERATING INSTRUCTIONS:
Warning: Operator should be thoroughly familiar with safety precautions before
attempting to operate this tool. Do not connect tool to power until the following procedures
are complete
.
1.
Install blade guide per photo below:
2.
Inspect blade for damage and be sure blade is sharp. Be sure blade is in roller
guides and teeth point in proper direction.
3.
Tighten blade by flipping blade-tensioning lever – be sure the blade is in the guides
and still moves smoothly.
4.
Connect to power following all safety warnings.
5.
Be sure work piece is secure.
6.
Test start tool and adjust speed using dial to correct operating speed in FPM based upon
material type.
7.
Place blade guide against work piece. Power the tool on by depressing the on/off switch.
8.
Place tool into cut, slowly, with blade at right angles to the work piece, using a firm grip.
Do not force the tool, chips should be in the shape of small number “6”s or “9”s.
9.
Allow tool to come to a stop before setting down.
10.
Store with blade tension removed and tool unplugged.
