COMMAND CONTROL
Joystick/Keypad for
ColecoVision
™
and ADAl\ZTM
CONSOLE
CONNECTION: To use the WICO Command Control Joystick/Keypad for
your ColecoVision or ADAM system, sim ply plug the WICO unit cord
into the control port panel on your video system in the same manner
as the original control unit (see diagram).
OPERATION: Hold you r Com m and Control Joystick/K e ypad with the
jo ystick end closest to you. The arcade-sized jo y s tic k delivers quick,
precise 8-w ay directional control by moving the handle forward, back
ward, left, right, and to each 45 degree angle in between. The keypad
is sized and laid out like your original controller, and is com patible
with all of y ou r ColecoVision keypad overlays sim ply by cutting off the
side tab of the keypad overlay (see diagram). The keypad also may be
used for all the num eric functions of the original ADAM controller.
FIRE BUTTONS: The side-m ounted fire buttons are functionally identical
to those on your system ’s original controller, and should be used in
the same manner. In addition, your C om m and Control Joystick/K eypad
provides a stick-m ounted arcade-type fire button for use as an alter
native to the side-m ounted fire buttons (see diagram). The fire button
on the stick will control prim ary firing as determ ined by software or
will sim ply act as a replacem ent fire button fo r the button furthest from
you on either side of the WICO unit.
