Wickes 223734, Manual

Page: 13 / 16

13
Warning: The sawing teeth are very sharp. Do not touch during mounting and application. The
workpiece must be clamped tightly before it is cut.
Pic Description Application
Sawing
Universal Metal/Wood End Cut
Blade
Wood, plastic, fiberglass, nails, non-
ferrous metals, thin sheet metal,
hardened fillers
Standard Wood End Cut Blade Wood, plastic, drywall
Precision Wood Cut Blade Wood, soft plastics
HSS Semicircle Saw Blade Thin wood, plastic, fiberglass, non-
ferrous metals, thin sheet metal,
hardened fillers, window glazing
Sanding
Sanding Pad (Perforated) Wood, plastic, hardened fillers
Scraping
Rigid Scraper Blade Old paint, hardened adhesives, caulk,
carpet
NOTE:
When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal. The saw blade lasts
longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade, rotate it and retighten
firmly.
Cut/Sand with a constant movement and light pressure. Heavy pressure does not increase the cut/removal rate - the
accessory merely wears faster. Excessive use and heat build up drastically reduces the life of saw blades.
APPLICATION