10
WARNING!
Remove the mains plug from socket
before changing the carbon brushes.
REPLACE THE CARBON BRUSH AS FOLLOWS:
1) Unscrew the outer brush cover with a Phillips
screwdriver (not provided). (See Fig. E1)
2) Remove the outer brush cover and unscrew the inner
brush cover with a flat screwdriver (not provided). (See
Fig. E2)
3) If the carbon on either one or both brushes has worn
down to 6mm or less, it should be replaced. Always
replace both brushes at the same time.
4) Insert the new brush (not provided) and replace the
brush cap.
5. CHANGE THE CARBON BRUSH (See Fig. E1, E2)
Fig. E1
Fig. E2
ON/OFF SWITCH
Depress the on/off switch (2) to start the tool and release
it to stop your tool.
CONTINUOUS USE
Depress on/off switch (2) then lock-on button (1), release
on/off switch (2) first and lock-on button (1) second. Your
switch is now locked on for continuous use. To switch off
your tool just depress and release the on/off switch (2).
4. OPERATING THE ON/OFF SWITCH (See Fig. D)
Fig. D
a
b
Summary of Contents for 223725
Page 1: ...PDH170DS 223725 BREAKER 1700W...
Page 14: ......
Page 15: ......
Page 16: ...Customer Helpline 0345 2005409...