ATTENTION! Read the instructions completely and carefully. They contain important notes for
usage, handling, recycling and it is a part of the product. Keep this document for later look-up!
V122020
Safety Notice
-
Use the device for its intended use only.
-
Do not use damaged equipment.
-
Avoid contact with mains voltages.
-
Ensure safe cable laying.
-
Do not kink cables.
-
Do not open or modify the device.
-
Do not short-circuit or bridge any contacts.
-
Do not cover the device while it is operating.
-
Keep away from children.
-
Use in dry conditions only.
-
Do not leave the device unattended during operation.
-
The device can generate heat during operation, pay attention to
proper ventilation.
-
Only compatible voltage sources may be used as power supply.
-
Compare input and output voltage of the product with the
equipment before connecting.
Responsibility and Warranty
-
The manufacturer has no influence on the installation of the
product. Therefore, the warranty only covers the product itself.
-
The manufacturer is not liable for personal injury or property
damage caused by improper maintenance, operation or
installation that is not described in this manual.
-
Neither change, nor modify the product or its accessories.
-
Use the product only for the purposes described in this manual.
Other uses lead to loss of warranty, guarantee and liability.
-
Changes, mistakes and printing errors on packaging, instructions
and equipment are reserved.
Disposal Instructions
The German Waste Electrical and Electronic-Equipment Law
(ElektroG) implements the EU WEEE directive for handle of electronic
waste. Electrical and electronic devices may not be disposed of with
household waste according to the European WEEE directive. These
devices can have potential effects on the environment and human
health, which are caused by the presence of hazardous substances in
electrical and electronic equipment.
The symbol of the "crossed bin" on the product, the instruction
manual and / or packaging, indicates those provisions. The ElektroG
obligates the consumer to not dispose of electrical and electronic
waste as unsorted municipal waste, but to collect them separately.
You can return these products for recovery or recycling to the
manufacturer, to the sales outlets or to dispose them to public
collecting points. For details consult the respective country's law or
regulation. We, as a registered manufacturer, provide you with
important information about your contribution to the environment and
for the re-use of important raw materials from the products.
WEEE Directive: 2012/19/EU
Description, Connecting and Operating
Your power supply with USB is designed for charging
your devices on 100-240V AC. Compare before
commissioning observe the technical data. If in doubt,
consult your dealer.
1.
Connect the power supply with a compatible USB data
cable (not included) to your device.
2.
Plug the power supply into the 100-240V AC
power connection.
3.
The LED (if available) indicates an existing power
supply.
4.
To ensure a long working life and protect the environment
please disconnect after use all power and cable
connections.
Specifications
Input voltage
100 – 240 V AC
AC frequency input
50 / 60 Hz
Output voltage
12,0 V
Output current
1,0 A
Output power
12,0 W
Average operational efficiency
84,6 %
Efficiency at light load (10%)
83,8 %
Power consumption at no load
0,08 W
Manual for power supply 843683,843180
Wicked Chili GmbH, Eisentalstraße 11, D-71332 Waiblingen, www.wicked-chili.de, [email protected]
