LINEAR FEEDERS - MANUAL
WIBRAMET Piotr Sokołowski
Ul. Gnieźnieńska 68
75-736 Koszalin
NIP: 669-236-08-63
www.wibramet.pl
tel. 94 345 75 00
tel. 782 972 268
e-mail: info@wibramet.pl
PAGE 2
1. INTENDED USE
Vibratory linear feeder is intended for
lengthen feeding line of orientated, in bowl
feeders, components. Field of use: automatic
assembly, packing, controlling, machining
stations, transport of loose materials.
The vibratory feeder is an integral part of the
stands.
The device operates in normal ambient
conditions within temperature range from +5
to +35
˚
C.
2. WARNINGS
2.1
Do not connect the feeder to the power
supply network without proper supplying
controller provided for this purpose.
2.2
Do not pour any liquid on the feeder
during its cleaning.
2.3
Any maintenance and repair operations
should be done only if the power supply plug
is taken out from the power supply network
socket.
2.4
Do not operate the feeder before it is set
on rubber shock absorbers (6) located in the
base.
2.5
Do not used feeders in any explosive
atmosphere.
2.6
Do not use feeder without electromagnet
cover (3).
2.7
The electromagnetic field! People with
fitted cardiac pacemakers have to keep
distance of 0,5 meters from the vibratory
feeder.
3. DESIGN DESCRIPTION
Vibratory linear feeder consist of following
parts:
Feeder is equipped with set of flat springs
(made
from
steel
or
plastic)
and
electromagnet with regulated gap.
Electronic controllers with step-less feed
speed control are supplied in various versions
depending on individual arrangements made
with the customer.
Feeder is equipped in 4 pieces of absorber.
Feeder need to be mount to device by holes
into bottom of absorber.
4. TECHNICAL DATA
For standard feeder technical parameters see
table no. 1.
Feeder in standard version doesn’t have guide
rail.
5. MOUNTING OF GUIDE RAIL
To mount guide rail use 4 treaded holes in
aluminium support plate (2).
Structure of rail should be light and stiff.
Mass of rail shouldn’t exceed the maximum –
see table 1.
Recommended dimensions of rail behind and
in front of aluminium support plate (2) are
marked in drawing.
It is good to lean the feeder by angle 3 to 4˚ to
outlet.
6. FEEDER STARTING
Feeder is supplied with controller.
To start feeder please insert controller plug
into electrical socket 230V/50Hz.
Press the start button and set transmission
performance by knob.