WIA CP144-1, Operator'S Manual

Page: 8 / 36

Weldmatic 350 & 500 | Operator Manual | Model No CP144-2/CP145-2
9 8
Austarc 13S, Classification E4313-A
A smooth running electrode with a soft arc,
particularly suited to light sheet metal and
smooth mitre fillet welds.
Austarc 16TC, Classification E4916-A
A low hydrogen electrode with good
arc stability and out-of-position welding
characteristics. This electrode is ideal
for medium carbon steels, or steels of
unknown analysis.
Unicord 312, Classification ES312-16
A high tensile (50tsi), chromium nickel
electrode specially formulated for joining
all alloy steels and irons, and for tool and
die maintenance.
GTAW (TIG Welding)
Gas Tungsten Arc Welding (GTAW) is a
welding process where the arc is struck
between a non-consumable tungsten
electrode and the work piece. A ceramic
nozzle surrounds the tungsten electrode
and directs a flow of inert gas, usually Argon,
over the electrode and the weld zone. If
filler metal is required, it is hand fed into
the welding arc. The DC current output of
the Weldmatic is suitable for welding most
ferrous and non-ferrous metals, but is not
suitable for welding Aluminium for which an
AC machine is required.
2 RECEIVING
Check the equipment received against the
shipping invoice to make sure the shipment
is complete and undamaged. If any damage
has occurred in transit, please immediately
notify your supplier.
The Weldmatic 350 package contains:
– CP144-2 Weldmatic 350 power source.
– Argon gas regulator.
– Gas Hose
– Welding torch – 300 AMP fitted with
Bernard 0.9 centre fire tip
– Work lead and spring clamp - 10m
x 35mm2 cable with large twist lock
connector.
– W67-0 wire feeder with 4 roll drive.
– Feed roller V0.9/1.2mm with V groove
quantity 2 fitted
– Feed roller V0.9/1.2mm with teeth
(knurled) quantity 2 spare
– Composite lead 35mm2 10m
– AM358 trolley with drawers
– Owners Manual CP145-40
The Weldmatic 500 package contains:
– CP145-2 Weldmatic 500 power source.
– Argon gas regulator
– Gas Hose
– Welding torch - 400amp fitted with
0.9mm Bernard centre fire tip
– Work lead and clamp - 10m x 50mm2
cable terminated with G clamp
– W67-0 wire feeder with heavy duty
4 roll drive
– Feed roller V0.9/1.2mm with V groove
quantity 2 fitted
– Feed roller V0.9/1.2mm with teeth
(knurled) quantity 2 spare
– COMPOSITE LEAD 50mm2 10m
– AM358 Trolley with drawers
– Owners Manual CP145-40
Optionally available
– TIG Torch Complete TIG002, 4m cable
with twist-lock connection and fitted
with 2.4mm collet. Manual Gas valve on
hand piece