A3: The cable must be less than 100 meters long (328
feet) if it doesn’t support the Extend function .
Frequently Asked Questions (FAQ)
Q1. The Power LED is not lit.
If the Power LED is not lit, check as follows:
A1: Make sure the power adapter is connected to the switch
with power source properly.
A2: Make sure the voltage of the power supply meets the
requirements of the input voltage of the switch.
A3: Make sure the power source is ON.
Q2. The PoE/Link LED is not lit when a device is
connected to the corresponding port.
A1: Make sure that the cable connectors are firmly plugged into
the switch and the device， the Ethernet cable should be
pure cooper CAT5/5e/6.
A2: Make sure the PD is compatible to the switch, please check
detailed PIN information in the PIN definition table.
The PIN Definition of WI-Tek PoE
For technical support and other information, please
visit:
www.wireless-tek.com
Fast Ring Application
Note:
1.Support 30 pcs switches at maximum in a cascade system.
2.There should be at lease one Managed Industrial switch in the
cascade system for data backup and MSTP protection.
For managed model(WI-PMS312GF-I), If you want to configure L2
advanced function, please launch a browser and type 192.168.0.1 into
address bar. The default username and password are both admin in lower
case.
Warranty Card
Summary of Contents for WI-PS306GF-I
Page 3: ......
