WI AUDIOSTREAM JM-WAL45 User Manual Download Page 17

~

 

VoIP Microphone:

   The Microphone on the Receiver dongle is used with 

optional PC/MAC USB

 

 

Transmitter dongle for Voice over Internet Protocol (VoIP) communications. 

 

 

This powerful feature allow musicians to collaborate with each other over the  

 

 

 

internet  

 

 

F

 Please refer to the  “Function Matrix Table” section of this manual for more details  

 

 

To activate the VoIP Microphone on the  Receiver dongle, press the LINK / VoIP    

 

 

button once. The Blue LED on the reviver will turn ON when the VoIP mIC is  

 

 

 

activated. VoIP MIC is now ready for use on your PC or MAC with the optional    

 

 

USB Transmitter dongle

      

Charging Port: 

 

The receiver dongle utilizes mini USB connection to power up and charge the 

 

 

 

internal batteries. The transmitter dongle can be charged using the supplied  

 

 

 

universal AC charger, via the instrument built-in USB port or the optional AA 

 

 

 

battery power booster USB adapter.

       

Belt Clip:

  

The receiver dongle can be attached to, belts, shirts and pants pockets when used 

 

 

 

with ear-worm MICs or in-ear professional personal monitors. The rigid small size  

 

 

light wight design is easy to ware without impeding your movement.

RECEIVER CONTROLS

Wi-AudioStream

17

12

11

Summary of Contents for JM-WAL45








































Reviews: