background image

TECHNICAL DESCRIPTION

The Whyte Smart Apartment PSU is an intelligent power supply that operates 

in  "follow  me"  mode when  connected  to  any  satellite  Set-top  box  (Legacy 

13/18V +22kHz, DiSEqC switching or dSCR modes are supported). 

The perfect partner for the Whyte Smart Apartment PSU is the Whyte 

WSCR504RP  Remote  Powered  dSCR  Multiswitch  which  is  designed 

specifically for installations where no landlords power is available.

Where the Set-top Box voltage is below 15.5V DC the Multiswitch supply 

voltage will be 14V DC, if the Set-top Box voltage is more than 15.5V DC the 

Multiswitch supply voltage will be 18V DC. 

Where no Set-top voltage is present (0 Volts) the default Multiswitch supply 

voltage is at 14V DC enabling its use as a 14V Masthead Power Supply that 

can deliver up to 1.57A (22W).

INSTALLATION INSTRUCTIONS

Select a suitable location to install the Whyte Smart Apartment PSU. Do not 

install the power supply in damp, humid, hot, or dusty areas. Using the screw 

slots on the Corner Brackets, secure the power supply using the appropriate 

fixing screws and wall plugs to suit the relevant wall surface or cabinet.

All  connections  should  be  made  first  before  applying  AC  power.  F-Type 

connectors  should  be  firmly  finger  tightened.  The  markers  on  the  power 

supply indicate how to connect the coax feeds. The feed from the Set-top 

Box (STB) connects to the “STB TV” F-Type connector. 

The  feed  to  the  Legacy/dSCR  Multiswitch  connects  to  the  “Multiswitch” 

F-Type connector. (# See diagram 1)

6

Summary of Contents for WPSU-SAP1













Reviews: