background image

 

 

 

T-2 Version 08/05 

 

12 

 

 

ONE YEAR LIMITED WARRANTY 

 

This WHYNTER SNO portable ice maker is warranted, to the original owner within the 
48 continental states, for one year from the date of purchase against defects in material 
and workmanship under normal use and service. Should your portable ice maker prove 
defective within one year from the date of purchase, return the defective part or unit, 
freight prepaid (with two months of purchase; after two months to one year, customer will 
b

e responsible for freight cost to Whynter’s service department), along with an 

explanation of the problem. Please package the ice maker carefully in its original 
packaging material to avoid damage in transit. Please retain original box and packaging 
material. Under this warranty, Whynter will repair or replace any parts found defective. 
This warranty is not transferable. After the expiration of the warranty, the cost of labor 
and parts will be the responsibility of the original owner of the unit.  
 
THIS WARRANTY DOES NOT COVER: 
- Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes. 
- Damage, accidental or other wise, to the ice maker while in the possession of a 
consumer not caused by a defect in material or workmanship; 
- Damage caused by consumer misuse, tampering, or failure to follow the care and 
special handling provisions in the instructions. 
- Damage to the finish of the case, or other appearance parts caused by wear. 

1)  Filter. 
2)  Damage caused by repairs or alterations of the ice maker by anyone other than 

authorized by the manufacturer. 

3)  Freight and Insurance cost for the warranty service. 

 

To obtain service or information, contact 

Whynter Innovations Group via Email at 

[email protected]

 

or call 866-WHYNTER. 

 

Summary of Contents for SNO T-2C













Reviews: