![background image](http://html1.mh-extra.com/html/whynter/rpd-311dw/rpd-311dw_instruction-manual_978371012.webp)
12
WATER DRAINAGE INSTRUCTIONS
Using a portable dehumidifier requires that collected water be emptied frequently. Draining water from this unit
can be done in 3 different methods:
1. DRAIN BUCKET METHOD
NOTES:
1. When the bucket is full, the Full indicator light will light. The com-
pressor and fan will turn off, the Full indicator will light, and a P2
code will be displayed.
2. It is recommended to turn the unit off before removing the drain
bucket.
3. Grip the left and right handles of the drain bucket securely and
carefully pull out the drain bucket. Do not put the drain bucket on the
floor because the bottom of the bucket is not even which may cause
the water to spill. See Fig.3 and Fig. 4.
4. Remove the water from the drain bucket and replace it back to the
dehumidifier. The drain bucket must be installed properly and se-
curely seated for the dehumidifier to operate.
5. The machine will restart when the drain bucket is restored in its
correct position. If the unit was turned off prior to the removal of the
drain bucket, press the Power button to restore operation.
When you remove the drain bucket, do not touch any inside parts of
the unit. Doing so may damage the product and result to injury.
Be sure to push the drain bucket gently all the way into the unit.
Banging the bucket against anything or failing to push it in securely
may cause the unit not to operate.
If the pump filter drops when you remove the bucket (see Fig.5), you
must reinstall the pump filter properly to the unit before replacing the
drain bucket into the unit (see Fig.6).
Upon replacing the bucket, firmly push the bucket in place until it
locks. There should be no gaps between the bucket and the dehu-
midifier.
When the drain bucket is removed, the unit will beep 8 times and the
digital display shows
Eb
.
Eb
is an error code that indicates that
the drain bucket is removed or not positioned correctly. Make sure
that the drain bucket is properly installed and the in right position.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Pump filter
Push up pump
filter in place