background image

To change the filter, 

NORMAL 

 

SOUNDS 

The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing operating noise. 

Even when the compressor cuts out, noises caused by changes in temperature and pressure are unavoidable. Operating noise 

will be most audible immediately after the compressor comes on. It becomes quieter as the operating period continues. 

The following noises are normal and occur from time to time: 

Gurgling sound, caused by the refrigerant flowing through the appliance's coils,

Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on.

Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature variations,

Fan operating sound, to circulate the air within the beverage cabinet.

Unusual noise is normally the result of improper installation.

Where the unit is installed in open-plan kitchen or in partition walls, the level of operating noise will be heard more 

acutely. However, this is due to the surrounding architecture and not to the unit.

NOTE: An individual's perception of noise is directly linked to the environment in which the unit is located, as well the 

specific type of models. Our appliances are in line with international standards for such appliance and in line with the 

latest technical developments. Please remember that the noise of the compressor and the coolant circulating in the 

system is unavoidable. 

11 

TEMPERATURE MEMORY FUNCTION

In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous temperature 

settings. When the power has restored, the temperature display will show the current cabinet temperature. 

INTERIOR LIGHT

The interior light makes it easy to view your beverage labels and enhances the display of your collection. The light can be 

turned on or off pressing the       light button on the display.

CABINET SHELVES

NOTE: 

Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air circulation 

within the cabinet. 

 

This appliance is equipped with removable shelves. To prevent damage to the door gasket, make sure the door is 

opened completely before pulling the shelves out.  

ACTIV

ATED 

 

CARBON

 FILTER 

The Whynter BBR-638SB/BBR-838SB are equipped with one activated 

carbon

 filter, which ensures optimum air quality 

within the beverage cabinet. This filter counters and prevents any contaminants and odors from the ambient air 

affecting the taste of the beverage stored. 

Replace the active 

carbon

 filter once a year. If you are interested in purchasing an additional 

carbon

 filter, please 

contact [email protected] for retail sales information. 

Operation and Controls

Turn the filter cover 90° clockwise or counterclockwise and then remove the filter.

Insert the new filter in the vertical position.

Turn the filter cover 90° clockwise or counterclockwise until it click into position.

Summary of Contents for BBR-638SB

















Reviews: