5 |
P a g e
Do not allow children to climb, stand or hang on the appliance. The air conditioner could tip
over and get damaged and/or seriously injure somebody
Keep fingers out of the air intakes and air outlets
The appliance is an electrical appliance. To avoid injury from electrical shock do not operate it
with wet hands, while standing on a wet surface or while standing in water. Do not use it in
outdoors or in wet conditions
When positioning or moving the appliance, ensure it is not turned upside down or greater
than 45° or more off level
This appliance is designed for household, non-commercial use only. Any other use will void
the warranty
Do not plug into the power outlet before set up is completed
Do not operate this unit without the air filter(s)
Do not use harsh chemicals to clean the filter(s). Dry thoroughly before inserting the filter(s) into
the unit
Do not add extra length to the exhaust hose by more than a total length of 9’. This will
reduce the cooling efficiency of the portable air conditioner
At the end of each season, all water must be drained from the unit and filter(s) must be
cleaned before storage
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS
ARE NOT FOLLOW ED.
OPERATING CONDITION
MODE ROOM
TEMPERATURE
COOL
Higher than 62°F / 17°C
DRY
Higher than 54°F / 13°C
Your portable air conditioner is supplied with a Leakage-
Current Detection and Interruption (LCDI) plug. This plug
reduces the risk of fire due to arcing faults in the power
supply cord. Please follow the instructions below to ensure
that LCDI plug works properly.
1. Plug the power cord to a grounded wall outlet. Do not
plug to a power strip or extension cord.
2. Press the TEST button on the plug. This should trip the
plug and cut the power to the air conditioner. If the plug
does not trip and the unit comes on, please contact
technical support.
3. Press the RESET button to start the air conditioner.
4. Do NOT use the TEST and RESET buttons to turn the
air conditioner on and off.
