background image

 

 8 

CONTROL PANEL 

Power icon 

Touch to turn the air purifier on and off

 

UV Bulb icon 

Touch to turn UV Bulb on and off  

• 

Ultraviolet light possesses just the right 

amount of energy to break organic molecu-
lar bonds. As micro-organisms pass by the 
UV rays radiated from the ultraviolet bulb, 
this bond breakage translates into cellular or 
genetic damage for micro-organisms, such 
as germs, viruses, bacteria, fungi (like 
molds), etc. This results in the destruction of 
the micro-organisms.  

Timer icon 

Touch to turn Timer on and off  
• When the air purifier is ON, touch the Timer 
icon to activate auto-stop. The air purifier 
can be set to turn off automatically in 2, 4, 6, 
or 8 hours, which will be indicated every time 
the Timer icon is pressed. To cancel the de-
layed switch off function, keep pressing the 
Timer icon until the indicator light goes away. 
If cancelled, the unit will operate continuous-
ly. 

Air Quality Filter icon 

• The Home icon indicates the quality of air 
GREEN - Good air quality 
BLUE - Fair air quality 
RED - Poor air quality 

 
• The Check Filter icon indicates that the 2-
in-1 Activated Carbon Filter & HEPA filter 
needs to be replaced.  

Fan Speed icon 

Touch to change fan speed 
• The air purifier’s fan speed can be changed 
from "1” to “6”, where “1” is the lowest fan 
speed setting and “6” is the highest fan set-
ting. 

Automatic mode 

Touch to activate Automatic mode 

 

• In this mode, the unit operates in a fully 
automatic operation that ensures hassle-
free functioning. The air purifier measures 
the air quality in the room and automatically 
selects the appropriate speed setting to 
guarantee the best possible air quality. 

Quick Smoke Removal mode 

Touch to activate Smoke Removal mode  

• 

In this mode, the unit operates on the 

highest fan speed for maximum purification.  

Sleep  mode 

Touch to activate Sleep mode  

• 

In this mode, the air purifier operates at 

the lowest fan speed and dimmed lights, to 
allow you to sleep undisturbed. The purifier 
switches to lower activity level, the fan 
speed and noise level are reduced and the 
energy consumption is minimized.  

Summary of Contents for AFR-425-PW/SW














Reviews: