STEP 4
Insert the back rest metal plates to both arms (2) & (3) as shown below. Ensuring
it is correctly in place.
STEP 5
Securing with 1 Bolt (C) by using L-key (D) going throuh the pre-drilled holes on
the cleat as shown in step 5.1.
Installing the legs (6) to the
pre-drilled holes on the bottom
of arms (2) & (3).
6.2 Inserting the unpacked pocket spring (9)
to the black woven cover (11) then
inserting into seat cushion fabric cover
6.1 Unpack the pocket spring
from vacuum bag.
11
10
11
Put the seat cushion onto slats as shown below. Your assembly
is now completed.
Please do not tighten the hardware until the entire assembly is completed.
