ASSEMBLY INSTRUCTIONS
FURNITURE PART LIST
ITEM
DESCRIPTION
QTY
A
HEADBOARD
1 PC
B
SUPPORT BOARD
2 PCS
C
HEADBOARD WINGS (L&R)
2 PCS
HARDWARE PART LIST
ITEM
DESCRIPTION
QTY
1
JCBB BOLT M8 x 50mm
4 PCS
2
JCBC BOLT M6 x 45mm
4 PCS
3
M8 FLAT WASHER
4 PCS
4
M8 SPRING WASHER
4 PCS
5
M6 FLAT WASHER
4 PCS
6
WOOD DOWEL M8 x 30mm
4 PCS
7
M4 ALLEN KEY (BALL SHAPE)
1 PC
8
M5 ALLEN KEY (BALL SHAPE)
1 PC
Read instructions carefully. See furniture and hardware part
list on the right for guidance.
Have all parts ready before assembly. Place all wooden furniture
parts on a clean and flat soft surface to prevent scratching.
Before you start, here are some words of caution:
1. Do not FULLY - TIGHTEN nuts and bolts until all nuts and bolts are partially tightened.
2. Do not FULLY - TIGHTEN nuts and bolts to avoid causing damage to the threading.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed :
Hammer
(not provider).
STEP 1
STEP 2
A
B
3
4
1
8
x 2
1 OF 2
Secure each support stand by using 2x JCBB Bolt [1] , 2x M8 Flat Washer [3] and
M8 Spring Washer [4].
Tighten with supplied Allen Key [8].
Repeat the same procedure to secure the other side
1.1 Open the zip at the headboard backing and take out all the parts.
1.2 Insert the support board from the bottom, align pre-drilled
support board holes over the pre-drilled headboard holes.
MODEL : BBT 6631 QUEEN HB
