Whittier Wood Pacific 1448AFGSPa Assembly Instructions Manual Download Page 1

 

P.O. Box 2827 
Eugene, OR 97402 USA

 

Production Code: 
 
 
 
 
 

VN 

04/13 

 

Model # 

1448AFGSPa; 1448AFCAFa

 

Pacific Queen Storage Bed 

AFGSP = Glazed Spice finish 
AFCAF = Caffè finish

 

Assembly Instructions

 

 
Congratulations! 

This fine piece of furniture will make a gorgeous  
addition to your home. For the best results, read the 
Assembly Instructions before you begin your project. 

IMPORTANT NOTES: 

 

For normal household use only. 

Not

 recommended to 

use this unit in a commercial setting. 

 

Unload items before you move this unit. 

 

Do not overload the drawers. 

 

Before you load or move this unit, tighten all screws  
and supports. 

  Before you begin your project, completely read the 

Assembly Instructions. 

  Store this item: 1- in its box; 2- in a dry place; 3- in 

temperatures that range from 40°F to 90°F (not on a cold 
and possibly damp cement floor). 

  Periodically inspect your furniture for any loose glue 

joints, screws or any other problem that might affect the 
stability of your furniture. Tighten or repair as needed.

 

  This assembly requires two people. 

 

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 

 CALL US FIRST! 

Do not return this item to the store.

 

Service Policy:

 We will replace any part that is defective, 

missing or damaged during assembly. For a replacement 
part, contact Whittier Wood Products customer service 
department by phone, fax, mail or email. 
 

Hours:

 Our friendly customer service staff can be reached 

Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You 
may leave a message 24 hours a day, seven days a week.

 

To Order:

 Provide the finish and furniture model number 

(upper portion of this page), the part letter, production 
code, quantity needed, reason for replacement and your 
full name, address and telephone number. 
 

Parts ship from our Eugene, Oregon factory within one or 
two business days from the time we receive your request. 
Please allow five to ten business days for delivery

 

800-653-3336

 

 

Outside the U.S. or Canada: 541-687-

0213 • Fax: 541-687-2060 

www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

 

 
 

Summary of Contents for Pacific 1448AFGSPa









Reviews: