1377AFGAC McKenzie Bookcase King Headboard
Assembly Instructions
Page 3 — 1377AFGAC — 02 /10
Tools required:
Drill, 1/8" bit, Phillips screwdriver, Slotted screwdriver
1.
NOTE: Use this instruction and hardware kit included with this 1377 McKenzie Bookcase King
Headboard ONLY if you are using a Hollywood frame.
IF you are using this product with Whittier Wood Furniture Footboard and Pedestal kits,
disregard this instruction and hardware and use what is included with your Footboard kit.
Remove the metal brackets attached to the Headboard (A).
2.
Adjust the Hollywood frame to fit your mattress and box spring.
3.
Place the Headboard (A) against the end brackets of the frame and mark the locations for
the screws. Drill pilot holes approximately 1-1/4" deep. To make sure you don’t drill deeper,
measure 1-1/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.
4.
Position the Headboard (A) against the frame and attach using #12 x 1-1/4" Pan Head Screws (ZL)
and Washers (ZK).
5.
Place your bed in its final position. To level the headboard, reach behind the bookcase front legs
and using a slotted screwdriver, find the Large Adjustable Glide (YA). Rotate it clockwise until
the Glide bears weight. See Figures 5, 5a and 5b.
THIS IS ESPECIALLY IMPORTANT IF THE BOOKCASE HEADBOARD SITS UPON A
CARPET TACK STRIP.
Fig. 5a
YA
ZZ
The top of the
Large Adjustable
Glide (YA)
is slotted.
Fig. 5b
Fig. 5
Hollywood bed frame removed
for illustration purposes.
Back view
