2140AST Ellison Upholstered Bench
Assembly Instructions
2140AST
— Page 3 — 05/18
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Mallet or Padded Hammer.
1.
Lay one Leg Frame Assembly (B) face down on a clean, protected surface. Insert the Apron
Assemblies (C) using the dowel and dowel hole in the Frame Assembly for alignment. Secure
with 3/8" X 2-1/2" Hex Bolts (H) and 5/16" Washers (F). See Figures 1 and 1a.
2.
Insert the Center Seat Support (D) using the dowel and the dowel hole at the center of the Side
Frame Assembly (B) as shown in Figure 2a. Secure with a #8 X 1-1/4" Pan Head Screw (M).
See Figures 2 and 2a.
Fig. 2
D
B
M
Fig. 2a
D
M
B
M
x 1
F
Fig. 1a
F
H
x 4
x 4
C
B
Fig. 1
H
C