7031GDRC Northgate Mirror
Assembly Instructions
3.
NOTE: The Mirror Wall Bracket (H) angles out at the top. When you hang your Mirror, the
bracket that is attached to the back of the Mirror fits over the angled part of the Mirror Wall
Bracket (H). See Figure 3.
A
Wall
Stud
Mirror Wall Bracket (H)
(side view)
Wall
Mirror Wall
Brackets (H)
(back view)
Fig. 3
4.
If you are attaching the Northgate Mirror to the back of a 7018 Northgate 8-Drawer Dresser,
follow steps 4-6.
Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(F) with four M4 x 41 Machine Screws (M). See Figure 4.
M x
4
7018 Dresser
F
M
(Back view)
Fig. 4
M
7031GDRC — Page 4 — 12/11