manualshive.com logo in svg

Whittier Wood 5197AFGMS, Assembly Instructions, Page: 4 / 4

Share
Download
Whittier Wood 5197AFGMS Assembly Instructions Download Page 4

5197AFGMS Ambierle Chairside

 

Table 

Assembly Instructions

 

5197AFGMS 

— Page 4 — 03/14 

 
3. 

Turn the table upright and insert the Drawer (C). 

 

4. 

Place the table at its final destination. To level the table, rotate the Adjustable Glide (M) found at 
the bottom of each leg assembly. See Figure 3. 

Fig. 3 

M 

M 

Summary of Contents for 5197AFGMS

Page 1: ... dust is present even in trace amounts Drilling sawing sanding or machining wood products generates wood dust a substance known to the State of California to cause cancer Warning This product contains a chemical or substance known to the State of California to cause cancer birth defects or other reproductive harm California Health and Safety Code Section 25249 6 DESIGN SUBJECT TO CHANGE WITHOUT NO...

Page 2: ... C Drawer Box inserted 1 D Drawer Face installed 1 E Drawer Slide pre installed set 1 F 6 x 3 4 Philtruss Screw inserted 6 G 6 x 1 2 Philtruss Screw inserted 6 H 8 x 1 3 8 Lo Profile Screw inserted 8 I 8 x 1 1 4 Pan Head Screw inserted 42 J 8 x 7 8 Black Lo Profile Screw inserted 4 K 3 8 x 1 Insert Nut inserted 8 L 1 4 x 20mm Insert Nut inserted 4 M Adjustable Glide installed 4 N Knob attached 1 O...

Page 3: ...n the right Drawer Release Lever See Figure 1a 2 Turn the unit upside down on a clean protected surface Place two Legs B at the front corners of the Case Assembly A making sure the drilled corners of the legs face toward the Corner Blocks Insert two 3 8 x 2 1 2 Hex Bolts Q with two Flat Washers P through the Corner Blocks and into the leg and fasten securely See Figures 2 and 2a Repeat for the oth...

Page 4: ...ly Instructions 5197AFGMS Page 4 03 14 3 Turn the table upright and insert the Drawer C 4 Place the table at its final destination To level the table rotate the Adjustable Glide M found at the bottom of each leg assembly See Figure 3 Fig 3 M M ...

Reviews:

No comments