background image

For normal household use only.

 recommended for commercial use.

Production Code:

  Completely read the Assembly Instructions before

you begin your project.

  Store the parts: 1) in their box; 2) in a dry place; 

3) in temperatures ranging from 40° to 90°. 

(Not on a cold, possibly damp, cement floor.) 

  Inspect your furniture periodically for any loose glue 

joi

affect the stability of your furniture. Tighten or

repair as needed.

nts or screws, or any other problem which may 

Congratulations!

This fine piece of furniture will make a handsome 

addition to your home. For the best results, start by 

reading the Assembly Instructions 

before

 you begin

your project.

Service Policy:

We will replace any 

parts which  are defective, missing or 

damaged during assembly. Please contact 

Whittier Wood Products customer service 

department directly (by phone, fax, mail or 

email) for replacement parts.

Hours:

 Our friendly customer service staff 

can be reached Monday-Friday 7:00 a.m. to 

5:00 p.m. (Pacific Time). A message can be 

left 24 hours a day, 7 days a week. 

To Order:

 Provide the complete furniture 

model number (upper left corner of this 

page), part letter/number, production code, 

quantity needed, reason for replacement 

and your full name and address along with 

a telephone number in case we need to 

contact you.

Parts ship from our Eugene, Oregon factory 

within 1 or 2 business days from the time 

we receive the request. Please allow 5-10 

business days for delivery.

Outside U.S. or Canada: 541-687-0213

Outside U.S. or Canada: 541-687-0213

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

Do not climb or stand on this piece of

furniture.

Model #

Portland II Trestle

Bench

Assembly Instructions

5026KFDH

 

P.O. Box 2827

Eugene, OR 97402 USA

Fax: 541-687-2060 • www.whittierwood.com

Fax: 541-687-2060 • www.whittierwood.com

V

01/09

N

Summary of Contents for 5026KFDH

Page 1: ...tly by phone fax mail or email for replacement parts Hours Our friendly customer service staff can be reached Monday Friday 7 00 a m to 5 00 p m Pacific Time A message can be left 24 hours a day 7 days a week To Order Provide the complete furniture model number upper left corner of this page part letter number production code quantity needed reason for replacement and your full name and address al...

Page 2: ...utton Qty 2 H 8mm x 30mm Wood Dowel Qty 10 8 inserted J Hex Wrench Qty 1 E x 66mm Hex Bolt F Barrel Nut Qty 2 Qty 2 G 8x1 Pan Head Screw Qty 14 Before you assemble this product identify its parts and make sure quantities received match what is on this list If you need to replace a part please refer to the following list for its name and letter ...

Page 3: ...ls of the Leg A Gently tap with a padded hammer and quickly wipe away any excess glue Secure with 8x1 Pan Head Screw G See Figure 1 2 Spread a thin film of glue in the dowel holes on the Legs A Insert Middle Support C and quickly wipe away any excess glue See Figure 2 Secure with x66mm Hex Bolts E and Barrel Nuts F NOTE The bottom of the Barrel Nut is grooved When you insert the nut into the Middl...

Page 4: ...on the leg assembly so that the corresponding dowel holes in the top supports fit over the dowels in the seat Using the predrilled holes in the Top Support as guides secure with 8x1 Pan Head Screws G See Figure 3 NOTE The inside middle holes of the top supports do not receive screws 4 Glue Wood Buttons I into the exposed holes Wipe away any excess glue See Figure 4 Fig 4 no screws ...

Reviews: