3505AUFb McKenzie Lift Top Coffee Table
Assembly Instructions
3505AUFb — Page 3 — 03/17
Tools Required: 9/16" or Adjustable Wrench
1.
Remove the Drawers (E) from the Case (A). To remove the drawers, pull up on the left side of
the Drawer Release Lever while pushing down on the right Drawer Release Lever. See Figure
1a. Note where each drawer came from to ensure correct installation.
2.
Turn the unit upside down on a clean, protected surface. Lift upward and back on the Case
Assembly (A) until it rests in its opened position. Peel off the backings on the Velvet Pads (T)
and apply them to the bottom of the Top Assembly (B). Return the Case Assembly to its closed
position. See Figures 2 and 2a.
Fig. 2
Fig. 2a
A
B
T
Fig. 1
Drawer Release Lever
Fig. 1a
