3502GACb 3502CAFb McKenzie Entry Table
3503GACb 3503CAFb McKenzie Sofa Table
Assembly Instructions
3502GACb_3502CAFb_3503GACb_3503CAFb — Page 3 — 03/17
Tools Required:
Phillips Screwdriver, 9/16" or Adjustable Wrench
1.
Remove the Drawers (F) from the Case (Aa). To remove the drawers, pull up on the left side of
the Drawer Release Lever while pushing down on the right Drawer Release Lever. See Figure
1a. Note where each drawer came from to ensure correct installation.
2.
Turn the unit upside down on a clean, protected surface. Place two Legs (D) at the front corners
of the Case (Aa) as shown in Figure 2. Face the drilled corners of the legs toward the Corner
Blocks. Insert two 3/8" x 2-1/2" Hex Bolts (Y) with two Flat Washers (X) through the Corner
Blocks and into the leg and securely fasten. See Figures 2 and 2a. Repeat for the other front
leg.
Fig. 2
D
X
Y
x 4
x 4
D
X
Y
X
Y
Fig. 2a
Fig. 1
Drawer Release Lever
Fig. 1a