3451AFCAFb Stayton Wedge
Table
Assembly Instructions
3451AFCAFb
— Page 3 — 04/14
Tool Required: 9/16" or Adjustable Wrench
1.
Turn the Top Assembly (Aa) upside-down on a clean, protected surface. Position the Legs (B) in
the corners so the Insert Nuts (F) face in. Insert four 3/8" x 2-1/2" Hex Bolts (G) with four Flat
Washers (E) through the Corner Blocks and into the leg and fasten securely. See Figures 1 and
1a.
2.
Turn the table upright and place the table at its final destination. To level the table, rotate the
Adjustable Glides (K) found on the bottoms of the legs. See Figure 2.
Fig. 2
K
K
K
Fig. 1
B
B
Fig. 1a
E
G
Aa
E
G
x 4
x 4
