2900AFGAC Simplicity Butcherblock Table
40"x 66"– 96" — Parts List
Page 2 — 2900AFGAC — 07/08
A — Top Assembly — Qty. 1
F — Leaf Apron — Qty. 4
(attached)
I — Lever Lock — Qty. 6
J — Leveler Plate — Qty. 6
(attached)
G — Brass Angle Brace
— Qty. 4 (attached)
L — Corner Bracket
— Qty. 4 (attached)
C — End Apron — Qty. 2
(attached)
D — Left Front/Back Apron
— Qty. 2 (attached)
E — Right Front/Back Apron
— Qty. 2 (attached)
B — Leg — Qty. 4
N — 3/8" x 2½" Hex Bolt
— Qty. 4
O — 5/16" Flat washer
— Qty. 4
P — Insert Nut
(inserted in Legs) — Qty. 4
(attached)
H— #10 x ¾" Brass Oval
Head Screw — Qty. 8 (inserted)
K — #6 x ⅝ " Brass Flat Head Screw
(for Lever Lock and Leveler Plate)
— Qty. 24 (inserted)
M — #6 x ⅝" Undercut Head
Screw — Qty. 16 (inserted)
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
ASSEMBLY
INSTRUCTIONS
TOOL REQUIRED:
9/16" Wrench
1.
Place Top Assembly (A) upside-down on a clean, protected surface. Position Legs (B)
on Top Assembly (A) outside of and against the corners of the aprons. Insert 3/8" x 2½"
Hex Bolt (N) through Washer (O) and Bracket, and screw into Leg (B). Tighten bolts.
See Figure 1a. Turn your table upright.
I
Retighten bolts (N) after first week of use.
A
N
N
O
B
O
Fig. 1
Fig. 1a
