
Position unit at desired location. Locate stud in the wall behind unit. Attach Clip (R) to wall stud with
#8 x 2" Black Screws (T). See Figure 7a. Attach second clip to unit with #8 x 1" Pan Head
Screws (U). See Figure 7b. Connect the two clips with Nylon Restraint Strap (S). See Figures 7c
and 7d. If studs cannot be located, purchase proper tipping restraint hardware for your type of wall
and secure the unit according to that hardware’s directions.
Tipping Restraint
Note: When using the 2658AFGAC Hutch and the 2657AFGAC Buffet, secure the
2657AFGAC Buffet to the wall with tipping restraint sets included in the 2657AFGAC
Buffet hardware. Follow instructions below.
2658AFGAC — Page 6 — 08/08
7.
Fig. 7d
Fig. 7b
Q
N
Fig. 7a
P
N
Fig. 7c
N
P Q
O
Wall