2407GAC 2407CAF McKenzie Writing Desk
Assembly Instructions
2407GAC_2407CAF — Page 3 — 11/17
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Mallet or Padded Hammer.
1.
Position the Legs (B, C, D and E) and Side Stretchers (G) as shown in Figure 1.
NOTE: Be
sure the insert holes on the top corners of the legs face inward and the pocket drilled
holes of the Side Stretchers face the bottom of the legs.
Using the dowel holes as guides,
insert the dowels of the Side Stretchers (G) into the holes in the Legs.
2.
Insert the Back Stretcher (F) into the Back Legs (D & E) as shown in Figure 2. Place the Top
Assembly (A) upside-down on a clean, protected surface. Position the leg/stretcher assembly at
the corners of the Top Assembly (A). Insert the 3/8" x 2-1/2" Hex Bolts (V) with the Washers (S)
through the corner brace into the Legs and securely fasten. See Figure 2a.
Fig. 2a
S
V
x 4
x 4
F
A
Fig. 2
S
V
Fig. 1
G
G
C
B
E
D